OOZOM Auto Parts Production And Wholesale

Home / All / About Automotive Knowledge / GWM Cannon Grille Replacement: A Step-by-Step Guide

GWM Cannon Grille Replacement: A Step-by-Step Guide

Nov 16,2026

The front grille is one of the most visible parts of a GWM Cannon and a component that is frequently damaged in minor collisions. Replacing it is a manageable job for a well-equipped workshop, provided you have the correct part and follow a sensible process. This step-by-step guide explains how to replace a GWM Cannon grille safely and achieve a factory-correct finish.

Tools and Preparation

Before starting, gather basic hand tools, a trim removal kit, a clean work area and the correct replacement GWM Cannon grille. Confirm the part matches your model and year before beginning. Working in a clean, well-lit space prevents lost fasteners and makes the job far easier.

Having the right tools ready avoids the frustration of stopping midway through the job.

Step 1: Secure the Vehicle

Park the vehicle on level ground, apply the parking brake and switch off the ignition. Allow the engine bay to cool if the vehicle has been running. Safety comes first, and a stable vehicle makes every subsequent step safer and more precise.

Step 2: Remove the Fasteners and Clips

The grille is typically held by a combination of bolts and plastic clips along the top and sides. Use a trim removal tool to release the clips carefully, working slowly to avoid breaking them. Keep all fasteners organised, as they will be reused during reinstallation.

Patience at this stage prevents damage to surrounding panels.

Step 3: Detach Sensor or Camera Connections

On models equipped with cameras or sensors in the grille, disconnect the relevant wiring connectors before pulling the grille away. Note how each connector routes so it can be reinstalled correctly. Forcing the grille with a connector still attached can damage the wiring.

Step 4: Remove the Old Grille

With all fasteners and connectors released, gently pull the grille forward and away from the vehicle. Check that nothing is still attached. Compare the old grille with the new GWM Cannon grille to confirm they match in shape, mounting points and finish before proceeding.

Step 5: Fit the Replacement Grille

Position the new grille and align it with the mounting points. Reconnect any sensors or cameras, then press the clips into place and refit the fasteners. Work evenly from one side to the other so the grille sits squarely and panel gaps remain consistent.

A genuine-quality grille referenced to original specifications will align cleanly, avoiding the fitment problems common with inferior copies.

Step 6: Check Alignment and Finish

Once fitted, step back and inspect the grille. Check that the gaps around the headlights and bumper are even and that the grille sits flush. Reconnect the battery if it was disconnected and verify that any camera or sensor functions operate normally.

Sourcing a Quality Replacement

The replacement grille is as important as the fitting process. A part that does not match the original geometry will be difficult to install and may look wrong even when fitted. OOZOM supplies model-matched GWM Cannon grille assemblies with genuine quality and clear part identification.

A Clean, Confident Result

Replacing a GWM Cannon grille is straightforward with the correct part and a careful approach. By following these steps and choosing a quality replacement, workshops can deliver a clean, factory-correct result that satisfies the customer and supports the vehicle's appearance and function.

Why Genuine Quality Matters

Distributors who stock GWM Cannon parts benefit from repeat demand and stronger relationships with workshops that value reliable supply. For buyers comparing options, genuine-quality GWM Cannon parts consistently outperforms unverified alternatives on fit and durability.

A Reliable Source for Workshops

Sourcing grille replacement from an experienced supplier reduces fitment risk and protects the margin on every repair job. For buyers comparing options, genuine-quality grille replacement consistently outperforms unverified alternatives on fit and durability.

Building a Competitive Parts Range

Distributors who stock pickup maintenance benefit from repeat demand and stronger relationships with workshops that value reliable supply. For buyers comparing options, genuine-quality pickup maintenance consistently outperforms unverified alternatives on fit and durability.

Great Wall GWM Cannon Front Grille Original Factory Parts Wholesale Worldwide OO Great Wall GWM Cannon 2020 Front Bumper Original Factory Parts Wholesale Worldwi Great Wall GWM Cannon Headlight Original Factory Parts Wholesale Supplier Great Wall GWM Cannon Rearview Mirror Original Factory Parts Wholesale Supplier
GWM Cannon grille

A workshop fitting a GWM Cannon grille, with parts supplied through the OOZOM app.

OOZOM let your car be reborn!
OOZOM is a global supplier of Auto Accessories, Provide professional one-stop supplier of auto parts.
*Email
Name
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
follow us
subscription